马来酸三乙醇胺酯对水泥水化的影响

为克服三乙醇胺早强剂对水泥抗折强度和后期强度的影响,合成了马来酸三乙醇胺酯,并通过背散射电子成像(BSE)和BET分析,研究了马来酸三乙醇胺酯对水泥水化程度、C-S-H含量和水泥水化28 d分形维数的影响。结果表明:马来酸三乙醇胺酯可促进水泥水化尤其是水泥中硅酸盐相的水化;复掺马来酸三乙醇胺酯和聚羧酸减水剂,可显著提高水泥水化产物中C-S-H的含量;三乙醇胺降低了水泥石28 d的分形维数,马来酸三乙醇胺酯单掺及与聚羧酸减水剂复掺则使水泥石28 d的分形维数提高。由此可见,马来酸三乙醇胺酯作为增强型水泥早强剂具有广阔的应用前景。     

钛酸酯偶联剂对磷石膏/HDPE性能的影响

采用3种钛酸酯偶联剂改性超细磷石膏(UPG),将改性后的UPG添加到高密度聚乙烯(HDPE)中,研究了钛酸酯偶联剂结构对UPG/HDPE复合材料力学性能的影响。结果表明,钛酸酯偶联剂改性的UPG接触角增大,吸油值降低,201-UPG改性效果最佳,接触角和吸油值分别为106.25°和0.23。与UPG/HDPE复合材料相比,101-UPG/HDPE、201-PG/HDPE、311-UPG/HDPE复合材料的拉伸性能、弯曲性能和冲击性能得到了一定的提高,在101-UPG/HDPE复合材料中的效果最佳,分别提高了42.41%、64.04%、174.65%。SEM测试表明,加入了钛酸酯改性剂的UPG在HDPE中的分散效果较佳;流变测试显示,101-UPG/HDPE复合材料的黏度比HDPE明显提高。     

Cloud asset for urban flood control

The performance of physical assets has become a major determinant success factor for urban flood control. However, managing these assets is always challenging as there are a huge number of diverse assets involved, which are distributed throughout the city, and owned by different agencies. Aiming at improving the management efficiency of these assets, and ensuring their performance, this paper proposes the concept of cloud asset based on cloud computing, mobile agent, and various smart devices. Through hardware integration and software encapsulation, cloud asset could sense its real-time status, adapt to varied working scenarios, be controlled remotely, and shared among agencies. It enables accurate real-time control of every asset, and thus improves the management efficiency and effectiveness. This paper first presents the concept of cloud asset with its technical architecture, and then analyses the software agent model for cloud asset, which is the key enabler to realize UPnP (Universal Plug and Play) management of assets, and provides mobility and intelligence for them. After that, the framework of cloud asset-enabled workflow management is built, in which cloud asset could be easily found and dynamically invoked by different workflows. Finally, a demonstrative case is provided to verify the effectiveness of cloud asset.     

基于三维胞元空间的MA双向并行路由算法

针对传统移动代理(MA)在监测无线传感器网络(WSNs)的感兴趣信息时产生的延迟较大和能耗较多问题,提出了基于三维胞元空间的MA双向并行(3D-BPMA)路由算法.3D-BPMA将MA与传统的客户/服务器(c/S)模式相结合,在胞元内利用C/S模式搜集信息,在单层胞元系统和路由器与路由器之间采用MA双向并行的策略进行传输.仿真结果表明:3D-BPMA与LCF,DSG-MIP算法相比减少了平均响应时间和网络平均能耗,提高了MA发送率.     

The benefit of being physically present: A survey of experimental works comparing copresent robots,telepresent robots and virtual agents

The effects of physical embodiment and physical presence were explored through a survey of 33 experimental works comparing how people interacted with physical robots and virtual agents. A qualitative assessment of the direction of quantitative effects demonstrated that robots were more persuasive and perceived more positively when physically present in a user׳s environment than when digitally-displayed on a screen either as a video feed of the same robot or as a virtual character analog; robots also led to better user performance when they were collocated as opposed to shown via video on a screen. However, participants did not respond differently to physical robots and virtual agents when both were displayed digitally on a screen – suggesting that physical presence, rather than physical embodiment, characterizes people׳s responses to social robots. Implications for understanding psychological response to physical and virtual agents and for methodological design are discussed.     

Two-agent two-machine flowshop scheduling with learning effects to minimize the total completion time

We study a two-agent scheduling problem in a two-machine permutation flowshop with learning effects. The objective is to minimize the total completion time of the jobs from one agent, given that the maximum tardiness of the jobs from the other agent cannot exceed a bound. We provide a branch-and-bound algorithm for the problem. In addition, we present several genetic algorithms to obtain near-optimal solutions. Computational results indicate that the algorithms perform well in either solving the problem or efficiently generating near-optimal solutions.     

硝酸对水质中重金属含量测定的影响研究

采用火焰原子吸收分光光度法对加硝酸和不加硝酸的浑浊和澄清水质样品中镍、锰、铜、锌、铅的浓度变化进行测定研究和对比,结果表明硝酸加入样品中能起到固定剂的作用,加入硝酸对于铜元素的浓度影响很小,对澄清水中的锰元素和铅元素影响也很小,但是加入硝酸对镍和锌元素有较大影响。     

SBA-15固载磷钨酸催化剂的制备及催化合成叔丁基苯酚

以不同硅烷偶联剂改性的介孔分子筛SBA-15为载体、PW_(12)为催化剂,通过对SBA-15表面共价及非共价修饰制备磷钨酸@介孔分子筛/硅烷偶联剂复合催化剂PW_(12)@SBA-15/YSiX_3(YSiX_3=Apts、Atapts、Papts);并利用FT-IR、XRD、TEM、N_2吸附-脱附对其组成、结构及形貌进行表征。以改性SBA-15分子筛固载磷钨酸催化剂催化合成叔丁基苯酚为研究对象,考察不同硅烷偶联剂、反应温度、苯酚与叔丁醇物质的量比对催化合成叔丁基苯酚的影响,并获得合成叔丁基苯酚的最佳工艺条件,即反应温度145℃、n(苯酚)∶n(叔丁醇)=1∶2.5、重时空速2.2 h~(-1),该最佳反应条件下,PW_(12)@SBA-15/Apts催化剂催化合成叔丁基苯酚的催化活性最高,苯酚转化率为98.3%,2,4-二叔丁基苯酚选择性为57.3%.     

硅烷偶联剂改性玻璃纤维增强硅气凝胶的研究

为了达到增强硅气凝胶力学性能的目的,采用硅烷偶联剂KH550与KH560二步改性接枝玻璃纤维,进而制备纤维增强硅气凝胶。利用扫描电子显微镜、红外光谱仪、比表面及孔径分布仪、热重-差热分析仪、导热系数仪、电子动静态疲劳试验机等对其表征。实验结果表明：硅烷偶联剂改性玻璃纤维与硅气凝胶复合后网络结构更加均匀、骨架强度更加稳定、孔径多在30 nm以下、具有良好的热稳定性;同时,改性玻璃纤维的最佳添加量为20%（质量分数）,此时其密度为0.167 g/cm³,导热系数为0.018 5 W/（m·K）,接触角为127°,抗弯强度为1.042 MPa,抗压强度为0.669 MPa,达到预期实验目的。     

Allocation and sizing of battery energy storage system for primary frequency control based on bio-inspired methods: A case study

This paper presents a new procedure for optimal allocation and optimal sizing of a battery energy storage system (BESS) for primary frequency support in an isolated power system. For the BESS allocation, a transmission bus system with larger frequency decline is recognized and the BESS sizing is performed by a constrained optimization strategy based on a new modified metaheuristic, called Developed Harris Hawks Optimization (DHHO). The simulation results of the suggested DHHO are compared with Bat Optimization Algorithm (BOA) and Genetic Algorithm (GA) from the literature to show the method efficiency. The final results showed higher precision with lower required iterations for the suggested DHHO method. Also, the proposed DHHO gives lower investment costs for BESS with lower power and energy requirement toward the other compared methods.